Ming. Sep 27th, 2020

Technical Training | Pusat informasi pelatihan khusus teknik

Technical Training merupakan Pusat informasi pelatihan yang berhubungan dengan teknikal, seperti maintenance, troubleshoting, opration, csr, dll. bimtek, diklat

PELATIHAN MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE

2 min read
MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE

MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE

DESKRIPSI

Industrial machinery or power plant is a major supporter of the industry and has a very high critical rate. This means that if there is a sudden damage, the industry will experience huge losses both morally and materially. Therefore, industrial machine that has a high critical level must be monitoring to avoid a sudden damage.

Maintenance techniques that can be applied is a preventive maintenance which the main point is a scheduled maintenance and predictive maintenance. By applying predictive maintenance, the symptoms of damage can be detected as early as possible and the cost of treatment can be suppressed.

APA TUJUAN MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE?

• Participants understand machine condition monitoring techniques
• Participants can choose the engine condition monitoring techniques
• Participants can do the monitoring machine condition

APA MATERI MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE?

Outline Materi :

• Maintenance techniques and strategies
• Basic regular maintenance
• Basic predictive maintenance
• Bathtub curve
• Selection of machine condition monitoring techniques
• Inspection / monitoring of visual
• Use of lubricants
• Lubricant contaminants
• Inspection / monitoring and analysis of lubricants
• Inspection / monitoring and vibration analysis
• Vibration spectrum analysis
• Inspection and monitoring of geometric
• Analysis of leveling, run out and misalignment
• Alignment shaft

PESERTA

Electrical Engineer / Supervisor / Instrument Engineer / Supervisor / Professionals / Plant Maintenance / Operators / Supervisors / Superintendent / Technician

Metode PelatihanJadwal/Agenda Pelatihan
- Presentasi
- Diskusi
- Case Study
- Simulation
- Evaluation (Pre and Post Test)
- Kunjungan/Praktek (Menyesuaikan/tentative)
- 7 sd 9 Januari 2020
- 11sd13 Februari 2020
- 10 sd 12 Maret 2020
- 21 sd 23 April 2020
- 18 sd 20 Mei 2020
- 9 sd11 Juni 2020
- 21 sd 23 Juli 2020
- 25 sd 27 Agustus 2020
- 15 sd 17 September 2020
- 13 sd 15 Oktober 2020
- 17 sd 19 November 2020
- 22 sd 24 Desember 2020

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi & InvestasiFasilitas
- Yogyakarta (6.500.000 IDR / participant)
- Jakarta (6.500.000 IDR / participant)
- Bandung (6.500.000 IDR / participant)
- Bali (7.500.000 IDR / participant)
- Surabaya (6.000.000 IDR / participant)
- Malang (7.000.000 IDR / participant)
- Batam (7.500.000 IDR / participant)
- Lombok(7.500.000 IDR / participant)
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
- FREE TransporsiPeserta ke tempat pelatihan .
- Module atau Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2x Coffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
- Training room full AC and Multimedia

Catatan
Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.

Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Copyright © All rights reserved. | Newsphere by AF themes.