Sel. Mei 26th, 2020

Technical Training | Pusat informasi pelatihan khusus teknik

Technical Training merupakan Pusat informasi pelatihan yang berhubungan dengan teknikal, seperti maintenance, troubleshoting, opration, csr, dll. bimtek, diklat

Pelatihan Motor Drives, Automation System & Motor Inverter System

3 min read
Motor Drives, Automation System & Motor Inverter System

Motor Drives, Automation System & Motor Inverter System

Description

Electric Motor technical course will discuss application and installation issues related to motors, variable frequency drives and related automation products in three important sessions. The course will conclude with an operating demonstration that will illustrate the three types of equipment tied together into one system via communication cabling, as well as over air via radio transmission.

The Motors, Drives and Automation Systems course will provide the delegates with a solid base of Motor, Drive and Automation theory. The course will also make delegates aware of issues concerning the proper application, installation and maintenance of these types of equipment. The material handouts will cover a wide range starting from the basics and moving on to more complex issues.

•Application issues
•Speed range
•Torque Capability
•Min Speed
•Max Speed
•Reversing
•Stopping/Braking

Apa Tujuan Motor Drives, Automation System & Motor Inverter System?

After completing this programme, learners will better understand and be able to:
•Learn the Fundamentals of motors, drives and automation systems
•Update Yourself on the Latest Advancements in VFDs
•Learn the Latest Improvements in Motor Efficiency
•Practical Approaches and Problem-Solving Solutions
•Learn How to Solve Common Motor and VFD Problems
•Learn Practical Troubleshooting Techniques
•Learn the Automation Considerations Between Motors, Drives and PLCs
•Reduce Reliance on Outside Service Companies
•Make Sure Your Equipment is Up and Running

Participant

•Industrial, Commercial, Institutional Electrical Engineering & Maintenance Technicians
•Electric Motor Operations staff
•Other electrical personnel involved in the operation and control of electric motors.

Apa Materi Motor Drives, Automation System & Motor Inverter System?

1.Electric Motors
•Electromagnetism
•Developing a Rotating Magnetic Field
•NEMA Rotor Characteristics
•Motor Specifications
•NEMA and IEEE standards
•Enclosures
•MG! Part 30 and Part 31 differences
•Impregnation Systems
•Stator Failures and preventative measures
•AC Rotor Construction
•Rotor Failures
•Enclosures, Frames & Cooling
•Bearings
•Bearing Failures
•Insulation Classes
•General Motor Testing Methods
•Motor Overhauls
•Motor Rewinds
•On-line Condition Monitoring
•Information Management for Decision-making
•Qualifying Repair Facilities
2.AC Drives
•VFD Overview
•Voltage And Frequency
•Basic AC Drive
•Constant Torque Applications
•Variable Torque Applications
•Constant Horsepower Applications
•Multi-motor Applications
•Input Filtering requirements
– Line transients
– Power Factor
– Harmonic mitigation
•VFD Demonstration
•Output Filtering Requirements
– Long Cable runs
– dv/dt voltage rise
– Peak voltage
– Bearing Currents
3.Human Machine Interface and Automation Considerations
•Introduction
•PLCs
•Number Systems
•Terminology
•Basic Requirements
•Connecting External Device
•Programming A PLC
– Ladder Logic
– Statement List
– Function Blocks
•Discrete Inputs/Outputs
•Analog Inputs and Outputs
•High-Speed Instructions
•Communications
•Network Communications
– ASI
– Data Highway
– Profibus
– Device net
– TCIP
•Demonstration

Metode PelatihanJadwal/Agenda Pelatihan
- Presentasi
- Diskusi
- Case Study
- Simulation
- Evaluation (Pre and Post Test)
- Kunjungan/Praktek (Menyesuaikan/tentative)
- 7 sd 9 Januari 2020
- 11sd13 Februari 2020
- 10 sd 12 Maret 2020
- 21 sd 23 April 2020
- 18 sd 20 Mei 2020
- 9 sd11 Juni 2020
- 21 sd 23 Juli 2020
- 25 sd 27 Agustus 2020
- 15 sd 17 September 2020
- 13 sd 15 Oktober 2020
- 17 sd 19 November 2020
- 22 sd 24 Desember 2020

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi & InvestasiFasilitas
- Yogyakarta (6.500.000 IDR / participant)
- Jakarta (6.500.000 IDR / participant)
- Bandung (6.500.000 IDR / participant)
- Bali (7.500.000 IDR / participant)
- Surabaya (6.000.000 IDR / participant)
- Malang (7.000.000 IDR / participant)
- Batam (7.500.000 IDR / participant)
- Lombok(7.500.000 IDR / participant)
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
- FREE TransporsiPeserta ke tempat pelatihan .
- Module atau Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2x Coffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
- Training room full AC and Multimedia

Catatan
Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.

Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Copyright © All rights reserved. | Newsphere by AF themes.