Technical Training | Pusat informasi pelatihan khusus teknik

Technical Training merupakan Pusat informasi pelatihan yang berhubungan dengan teknikal, seperti maintenance, troubleshoting, opration, csr, dll. bimtek, diklat


3 min read


Power plants are inherently very complex systems. The challenge for power plant operators is to ensure maximum safety in all the processes of the water cycle. All components, including the piping systems, must conform to the highest safety and reliability standards. The piping systems in power plants, in particular, are exposed to excessive loads when transporting the acids and alkalis required for water treatment.

Presented in the following are several processes in which aggressive chemicals are used and which can cause corrosive damage in pipe networks. This course provides and understanding of the role of chemistry in a power plant and the effect of chemical controls on the operation of the system.

Unit efficiency, reliability, and availability can be adversely affected by improper boiler water chemistry. The results of a multi-million dollar overhaul can be negated during start-up due to improper boiler water chemistry.


Upon successful completion of this course, the participant should be able to:

  • Describe the theory behind chemical analysis and control used in the power plant.
  • Discuss the safety requirement to be followed during sampling, analysis, and addition of chemical.
  • Describe the procedures for sampling and analyzing various water sources.
  • Describe the basis for the various chemistry limits imposed for different system in the power plant.
  • Describe the mechanism for the various types of corrosion and how this corrosion is controlled.


1. Introduction

  • Boiler Feed water Treatment Developments
  • Treatment of Water

2. Chemistry Fundamentals

  • Matter and Energy
  • Atomic Structure and the Periodic Chart
  • Chemical Formulas and Equations
  • Solutions and Solubility
  • Solutions Concentrations
  • Solubility
  • Acids and Bases
  • Ionization of Water
  • Neutralization
  • Electrochemistry

3. Corrosion

  • Environmental Effects
  • Electrochemical Process
  • Factors Affecting Corrosion
  • Metallic Structure
  • The Chemistry of Corrosion
  • Galvanic Series
  • Electromotive Series
  • Alkaline and Acidic Solutions
  • Uniform & Location of Corrosion
  • Pitting Corrosion
  • Stress Corrosion
  • Exploitation
  • Corrosion Fatigue
  • Caustic Corrosion
  • Hydrogen Damage

4. Make Up Water Treatment

  • Clarification
  • Filtration
  • Water Softening
  • Demineralization
  • Types of Resins
  • Regeneration
  • Resin Fouling
  • Reverse Osmosis

5. Boiler Water Treatment

  • Properties of Water
  • Boiler Water Treatment
  • Feed water Treatment
  • Contaminants

6. Control Guidelines

  • EPRI Guidelines
  • Boiler Water Analysis
  • Feed water Analysis

7. Instrumentation

  • Analyzers
  • Sampling Water and Steam
  • On-Line Sample Panel
  • Conductivity Analyzer
  • pH Analyzer
  • Sodium Analyzer
  • Chloride Analyzer
  • Dissolved Oxy. Analyzers
  • Hydrazine Analyzers
  • Silica Analyzer

8. Course Conclusion


This course is designed for fossil power plant operators and supervisors who are involved in testing feed water and boiler water and making adjustments to chemical pumps based on their analysis.

Metode PelatihanJadwal/Agenda Pelatihan
- Presentasi
- Diskusi
- Case Study
- Simulation
- Evaluation (Pre and Post Test)
- Kunjungan/Praktek (Menyesuaikan/tentative)
- 7 sd 9 Januari 2020
- 11sd13 Februari 2020
- 10 sd 12 Maret 2020
- 21 sd 23 April 2020
- 18 sd 20 Mei 2020
- 9 sd11 Juni 2020
- 21 sd 23 Juli 2020
- 25 sd 27 Agustus 2020
- 15 sd 17 September 2020
- 13 sd 15 Oktober 2020
- 17 sd 19 November 2020
- 22 sd 24 Desember 2020

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi & InvestasiFasilitas
- Yogyakarta (6.500.000 IDR / participant)
- Jakarta (6.500.000 IDR / participant)
- Bandung (6.500.000 IDR / participant)
- Bali (7.500.000 IDR / participant)
- Surabaya (6.000.000 IDR / participant)
- Malang (7.000.000 IDR / participant)
- Batam (7.500.000 IDR / participant)
- Lombok(7.500.000 IDR / participant)
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
- FREE TransporsiPeserta ke tempat pelatihan .
- Module atau Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2x Coffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
- Training room full AC and Multimedia

Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.

Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama.

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Copyright © All rights reserved. | Newsphere by AF themes.